Before using the instrument, check whether the rotor centrifugal head is fixed, and then connect the power to open the timer; first start slow running, and check whether the rotor is stable and normal; then shut down and then connect the rear drain connector of the instrument and rotate Tightly, use the cup to store the moisture discharged from the instrument at the outlet of the latex tube, and use a cloth or wire mesh bag to hold the raw materials that need to be dehydrated. However, the diameter of the bag or mesh bag must be greater than 120 mm, and the height generally needs to be about 160-180 mm. When the raw material is loaded into the centrifugal head, it should not be too tight and needs to be evenly and loosely laid. At this time, the speed can be adjusted to 0, and the working switch can be turned from 1000 rpm to 1-2 minutes, so that the instrument can uniformly discharge the dehydrated material to most of the moisture. If the raw materials are not evenly laid, strong vibration may occur together. In this case, immediately stop the material and re-lay the material for a smooth start, then slowly adjust to high speed. The instrument is automatically timed so that the parts of the instrument are not easily damaged and can prolong the service life.
Thermal Relay is used to protect AC three-phase asynchronous motor/electric motor against overload and open phase. Korlen electrical appliances produce thermal relay switch in wholesale,being a good thermal overload relay suppliers from china. We also offers Manual Motor Startor , AC Contactor, led light, Circuit Breaker etc.
Thermal Relay,Latching Relay,Reed Relay,Polarized Relay
Wenzhou Korlen Electric Appliances Co., Ltd. , https://www.zjmotorstarter.com