A LED screen with a service life of more than 5 years, the screen is very flowery, will you directly scrap this screen? If your warehouse has some empty boxes, but the area is not big enough, it is not easy to sell, what would you do? If you have bought different batches of rental boxes and put together a color difference, what do you do?
LED display screen will use different degrees of flower screen and mosaic phenomenon for a period of time. This is due to the different attenuation curves of LED lights. The point-by-point correction technology can effectively adjust the brightness of different lamp points of the LED display to the same level. Level, let the LED display return to perfect display, we can also turn this process into an old screen refurbished LED display.
Here we have selected a LED display that has been used for more than 5 years for refurbishment. Firstly, after repairing the bad modules and defects, the ultra-high precision point-by-point calibration device is used to collect the brightness data of the LED display. The point correction software analyzes the brightness data and finally writes the corrected data to the control system.
After this series of processes, the original color difference is very serious, the "dirty" LED display instantly became very beautiful, as if buying a new LED display, is it really surprising? Many LED display users do not understand the point-by-point correction technology, resulting in many LED displays that can be used to be laid off in advance. No matter the LED display is scrapped or recycled, huge investment is required, and the point-by-point correction technology appears. It happens that the majority of LED display users can achieve meager investment, high return, and the corrected LED display can continue to be used, which is also a measure to practice low carbon environmental protection.
Why do LED displays need to be refurbished?
Due to the characteristics of the LED light-emitting chip and the manufacturing process, the uniformity of the lamp dot of the LED screen has always been a problem that is difficult to solve in the industry; and because of the discrete type of chip aging, etc., many of them are used for two, three, or even half a year. The LED display shows serious "flower screen" phenomena such as spots, color blocks and mosaics.
What kind of LED display can be refurbished?
Of course, not all LED screens can be refurbished by point-by-point correction. For example, the screen caused by problems such as large dead lights and power failures cannot be properly lit. If you encounter any problems, you must first fix the fault points. In order to achieve the old screen renovation.
How to renovate the LED display?
To renovate the old screen, you must first repair the fault point, clean the entire screen, ensure that the LED display is in an optimal state, and then you can start point-by-point calibration. Point-by-point calibration is the use of optical instruments to collect the brightness (or chromaticity) data of each LED of the LED display, scientific analysis and calculation by calibration software, and the corrected data is written into the control system to achieve the brightness of the LED display. (Chroma) a unified process.
The corrected LED display can maintain a brightness difference of 3%, the chromaticity difference is within 0.003, the corrected LED display can see obvious improvement effect, and of course, it will face a certain degree of brightness loss, depending on The quality of the LED display is gone.
TTN voltage stabilizer has the low energy consumption,the over voltage protection,the low voltage protection,the over-current protection,the over-loading protection,the over-temperature protection and so on.It boasts for many kinds of protections,the collection energy conservation and the environmental protection ect.This is a brand-new concept product which possess many new technologies!This series products simultaneously are applied for many technical monopolies
We already applied many kinds of this products patent, and the technical patent NO: 200720036394.1 and Appearance paten NO: 200730025909.3
2. Use for equipment:
Computer
Test equipment
Light system
Safe alarm system
Ray equipment
Medical equipment
Copy machine
Stereo equipment
Numerical control machine tools
Industrial automation equipment
Color and drying equipment
Test equipment
Hi-Fi equipment
Voltage Stabilizer,Voltage Stabilizer For Ac,Voltas Stabilizer,Power Stabilizer
zhejiang ttn electric co.,ltd , https://www.ttnpower.com