1, according to the wire color marking circuit
Black - internal wiring of devices and equipment.
Brown - the positive pole of the DC circuit.
Red - phase C of a three-phase circuit;
a collector of a semiconductor transistor;
A cathode of a semiconductor diode, a rectifier diode, or a thyristor.
Yellow - phase A of a three-phase circuit;
The base of the semiconductor transistor;
The control pole of the thyristor and the triac.
Green - Phase B of a three-phase circuit.
Blue - the negative pole of the DC circuit;
The emitter of a semiconductor transistor;
The anode of a semiconductor diode, rectifier diode or thyristor.
Light blue - the neutral or neutral of a three-phase circuit; the grounded neutral of a DC circuit.
white
The main electrode of the triac; no semiconductor circuit of the specified color.
Yellow and green two colors (each color is about 15 to 100 mm alternately attached) - a safe grounding wire.
Red and black parallel—AC circuits connected by two-core wires or two twisted wires.
2. When selecting the color of the wire according to the circuit
AC three-phase circuit
Phase A: yellow; Phase B: Green; Phase C: Red;
Neutral or neutral: light blue; Safety ground wire: yellow and green.
AC circuit connected by double-core wire or double stranded wire
Red and black in parallel.
DC circuit
Positive: brown; negative: blue; grounded neutral: light blue.
Semiconductor circuit
Collector of semiconductor triode: red; base: yellow; emitter: blue. Anode of semiconductor diode and rectifier diode: blue; cathode: red.
Anode of thyristor tube: blue; control electrode: yellow; cathode: red.
Control electrode of the two-way thyristor: yellow; main electrode: white.
Internal wiring of the entire device and equipment is generally recommended: black; semiconductor circuit: white;
When there is confusion: allow the selection of other colors outside the color (such as: orange, purple, gray, green blue, rose, etc.).
Specific color
On a wire, if there are two or more kinds of calibratable colors, depending on the specific condition of the circuit, the color is fixed according to a certain meaning that needs to be expressed in the circuit.
Schedule: National three-phase wire color requirements standard
Wire harness and the surrounding parts shall be even and sufficient distance shall be kept from the heat source,
Considering the protection against electromagnetic interferencee,
Consider assembly technology, maintenance technology,
Grounding wire layout,
Heat dissipation of wire harness and fuse box
Car Seat Harness,Power Seat Wiring Harness,Power Seat Harness,Right Seat Wire Harness
Dongguan YAC Electric Co,. LTD. , https://www.yacentercns.com