I. System introduction and main highlights
Briefly introduce the multi-audio fingerprint elevator intelligent elevator management system:
The Doo fingerprint elevator intelligent control management system mainly consists of a fingerprint elevator read head installed in the elevator car or outside the car, a fingerprint elevator controller at the top of the car, a fingerprint collector installed in the management center, software, and the like.
A fingerprint reading head is arranged in the elevator car. After the elevator user presses the fingerprint, the elevator can open the car interior command for the fingerprint pre-set floor and provide the user with the registration; if the unauthorized floor is not registered, the elevator cannot be registered. Open public areas do not require fingerprints to register. You can restrict unrelated people from entering the fingerprint permission area. A fingerprint reading head is arranged outside the hall of the elevator. After the user of the intelligent fingerprint elevator presses the fingerprint, the elevator can open the external call button preset for the fingerprint and provide the user with the registration; the unauthorized fingerprint cannot be registered and opened. The call button in the direction of the public area does not require fingerprints to be registered. An elevator that restricts access to fingerprints by an unrelated person can be restricted. The fingerprint collection center can use the permissions of each fingerprint before it can be used. Different fingerprints can set different permissions, corresponding to different users; the management fingerprints held by the administrator are usually set to use all the permissions of the elevator; The fingerprint control elevator management system automatically withdraws from the management when the elevator is in special state such as fire protection and overhaul. It can also exit the management through the manual switch. The fingerprint-type elevator can realize fingerprint-free registration, which is convenient for the elevator access control system to be used under special circumstances.
The intelligent fingerprint control elevator management system strengthens the weak side of the management in the traditional safety management system, greatly improves the safety level of the building and gives the owner a noble enjoyment.
The role and contribution of the system to society:
1. Significantly improve the convenience and safety of the owner's residence, bring concentrated and simple and effective work to the property manager, and raise the real estate selling point for the real estate agent;
2, energy saving
Second, system function description and technical parameters
A, technical parameters
·Fingerprint elevator intelligent management system product model: DUOAO-DT-CK
·Elevator fingerprint box appearance size: L350*W350*110H
·According to fingerprint working voltage and current: DC DC 24V±10%/3A, power supply with overcurrent, overvoltage, lightning protection, anti-static function
·Elevator presses the fingerprint working main board maximum working current "480mA elevator access control
· Working current is about 120mA;
· Elevator intelligent control layer: The main control board controls 16 layers, which can be expanded according to requirements;
· Each contact is a passive dry contact input and output characteristic; one fire linkage input, 32 contact output;
· On-resistance "3Ω;
·The cutoff resistance is greater than "20MΩ;
·Usage environment: Temperature: -20--70 °C Relative humidity: 20%--90% no condensation;
·Storage environment: Temperature: -30--90 °C Relative humidity: 20%--90% no condensation;
· Use fingerprint: typical operation time is 0.3 seconds;
·Communication interface: RS485/RS232, optional TCP/IP, can be run completely offline
B. Brief description of the functions of the fingerprint elevator intelligent control system
1. Intelligent elevator floor personnel control system, specially designed for the control personnel in the elevator school box to enter and exit a specific floor. Control fingerprinted personnel to enter and exit certain floors that are allowed to enter and exit to prevent random access to each floor to ensure safety;
2. The system is connected to the elevator itself by passive contacts. The two are completely isolated and will not have any impact on the original performance of the elevator;
All-port over-current, over-voltage, lightning protection, safe and stable;
3. With section type increase, delete, query fingerprint number and floor setting, you can set the control of the elevator such as the holiday time permission setting in different time periods;
4. With time zone control: realize that the system is open for a certain period of time, controlled within a certain period of time, so that the elevator can automatically run according to regulations;
5. Operation mode: The single-layer fingerprint (owner's fingerprint) holder is directly directed by fingerprint. No need to press the button;
6. The product comes with self-test device. When the system fails or is damaged, it can send out the signal, it will automatically detach from the original system, restore the original state of the elevator, and not affect the use of the elevator;
7. With fire signal input interface, when the passive dry contact fire switch signal is activated, the fingerprint elevator system does not work, and the elevator returns to the original state;
8. The core adopts high performance, low power ARM chip (ARM core, which can quickly meet the customer's personalized functional requirements;) and uses low-power CMOS microcomputer, when the power is off, the personnel and stored data can be saved for 10 years without loss.
Third, the system consists of
1, fingerprint elevator controller
Fingerprint elevator controller (using 32-bit ARM high-speed processor, processing data is fast and safe.)
·Product model: DUOAO-DT
· Appearance size: L350*W350*110H
·Working voltage and current: use DC DC 24V±10%/3A, power supply with overcurrent, overvoltage, lightning protection, anti-static function
·Main control board maximum working current "480mA
· Working current is about 120mA;
· Elevator fingerprint control layer: The main control board controls 16 layers, which can be expanded according to requirements;
· Each contact is a passive dry contact input and output characteristic; one fire linkage input, 32 contact output;
· On-resistance "3Ω;
·The cutoff resistance is greater than "20MΩ;
·Usage environment: Temperature: -20--70 °C Relative humidity: 20%--90% no condensation;
·Storage environment: Temperature: -30--90 °C Relative humidity: 20%--90% no condensation;
· Using fingerprints, the typical operation time is 0.3 seconds;
·Communication interface: RS485/RS232, optional TCP/IP, can be run completely offline
2, fingerprint reader
Used in conjunction with the fingerprint elevator intelligent controller;
Fingerprint, typical operation time is 0.3 seconds;
3. Fingerprint elevator intelligent control system management center equipment:
Fingerprint elevator fingerprinting technical parameters
A. Fingerprint fingerprint product model: DUOAO-CJQ
B, appearance size: L140*W100*30H;
C, power supply: external DC12V ± 5%;
D, power input power: 2W;
E, working environment temperature: -25 ° C ~ 45 ° C;
F, working environment relative humidity: ≤90% (no condensation);
G, reader and host communication mode: standard RS-232 asynchronous serial communication;
H, communication parameters: baud rate: 115200bps; communication format: 1 start bit; 8 data bits; 1 stop bit; no parity; handshake mode: software handshake.
Fourth, the software profile
Fingerprint intelligent elevator control system software main interface
For the operator who uses the system for the first time, almost all operation controls use shortcut keys. The system operator can directly click the corresponding shortcut button on the keyboard to perform corresponding operations. The quick start module of the system can quickly set all the parameters of the system. Detection, it is convenient for users to quickly set the parameters required for normal operation of the system, so that users can quickly grasp the use of the system.
Five, fingerprint elevator equipment installation method
The fingerprint elevator controller is safe for the car top, and the fingerprint elevator reading fingerprint device is installed at the appropriate position of the COP panel of the car operating box. In order to facilitate the user to press the fingerprint and input the password, the reading fingerprint device is generally installed in the car inner bottom to the operation panel 1.2 ~1.4M between.
We are saleing Membrane Keyboard for B&R Siemens Allen-Bradley KUKA Proface Beijier Beckhoff,provides the product information.
Membrane Switch for our products are widely used for medical and industrial equipment, research shows, machinery equipment, industrial control, man-machine interface, industrial automation integrated workstation, POS, CNC etc. we have a lot of Membrane Switch for B&R, standing some of our inventory stock.
membrane keyboard,membrane keypad,membrane switch,operator panel keypad
GUANGZHOU VICPAS TOUCH TECHNOLOGY CO.,LTD , https://www.touchsuppliers.com