Value is not worth buying: worth it
Recommended crowd: No interest in digital hardware, home signal is a problem, just want to buy a router to use the crowd.
I have always felt that Ma Yunjia just described this as a router that might be positioned slightly higher-end. However, this router is different from other routers. If you want to classify, the router camp can be divided into Q1 and other routers. Because, unlike other routers, this Q1 signal can not only go from the air, but also from the wires.
Hey, cat teacher classes startLike water ripples, the wifi signal is centered on the signal transmitter and spreads around to transmit signals. After these diffuse signals meet the wall, they will penetrate or reflect back. Of course, most of the signals are reflected through the "through the wall" effect. So if you close the door where the router is located, the signal will be much reduced. (Like a sweeping robot, your door is open, and it wanders around on its own, but if you close it, it won't go.)
Under normal circumstances, the signal emitted by the router will be greatly attenuated after it encounters a wall. This attenuation will increase as the number of walls increases, thus affecting the signals received by the electronic devices. At present, there are two possible solutions.
One is to increase the output of the signal. If a signal of 10 is emitted and only 2 signals penetrate the wall, then a signal of 100 will be emitted, so that there will be 20 signals through the wall. This approach is simple and crude and is the first choice for many router manufacturers.
The second type is router relay. This is like a router relaying each other. A router emits a signal of 10, leaving only 2 signals behind the wall. The B router expands the received 2 signal to 10 and transmits it again. This relay signal can relay signals to very far away places. But there are also drawbacks. That is, the router only expands the signal and does not increase the speed of the signal. In other words, the signal from the 2 through the wall, even if increased to 10 by the router, the speed is still 2 speed.
The child routers of Q1 also belong to the router relay. But unlike the second, it is to let the router's signal go from the home wires. (As for what the principle is, I'm not a professional. It's not clear.) As long as the mother router and the child router are on the same wire, then simply picking a power outlet and plugging it in, the child router can receive the parent router's emission from the wire. The signal came and sent the signal. Moreover, there is no signal attenuation. How much signal is sent from the parent router, the child router can send it. (Maybe there is attenuation, but I don't have special equipment to detect it. The actual experience is not much different.)
This is really what the ad says "where there is no signal, where to insert".
Reasons to purchaseGo to the floor plan of our home first.
Really can not find the floor plan, had to draw one
Our home is an old-fashioned apartment. Developers are more realistic. Walls are not as thick as they are. As long as they close the door at night to sleep, basically my own room will not have a signal. (Afterwards, a wife can give birth to a child without worrying about wifi radiation.) Plus, the house is very old. At the time of renovation, the network cable was not taken into account in each room. Therefore, the network cable was not pre-embedded in the wall, and only the network cable was used. The interface is in the study. The furthest from my room, the distance from a cable is like running a marathon.
Maslow once said that people who do not have wifi will die. And I, as a modern otaku, settled in the room every day, burning traffic, thinking about how to direct wifi signals into the room. (In order to save money)
Without knowing Q1 in this world, my initial approach was to adjust the location of the router.
Pulling a cable from the library and placing the router in the living room, the wifi signal can reach my room, but the signal is still weak after the door is closed. (The wall separating the room from the living room is super thick, a whole, ah, all solid)
At this time, according to past practice, I have two solutions.
1, increase the wifi signal. Buy wifi signal antenna more, thicker, longer router to increase wifi signal. In this way, the signal that turns around in the living room will also run to the room more.
2, router relay. In the corridor between the room and the toilet, add a router to send the signal to my room.
After careful analysis, the effect of the second method will be better. However, there is no outlet in my corridor! If the toilet is installed, the router is too small to signal the toilet, too big to occupy the position, and is often unplugged by the parents. After comprehensive consideration, only the first option can be selected. This program has been used for several years.
After purchasing Q1, I installed the parent router in the study, and the child router was installed directly into the room. Then, the room signaled.
Q1 looks pretty, especially white. It's just expensive. When I bought it, it was just the New Year. A certain fish just flowed in a lot of new year-end prizes that weren't opened up, and then successfully bought a black Q1 at a more appropriate price (480).
Q1's package is a bit simple, a mother router, a sub-router, two manuals, a noodle data line, a power line will have nothing else, but a router is only these things.
Q1 has two types, white and black. Personally think that white looks better, but unfortunately did not buy it. Q1 adopts a two-stage design. The upper section is smooth, the lower section is frosted, and the middle one is separated by a silver belt.
The "Hi" button at the bottom is the start button. It is also a status light. It looks particularly good when you open it. But if you put this in your sleeping room, the brightness is comparable to that of a night light. The sensitive person must cover this light.
Top chrysanthemum icon. It's very simple and it looks good.
This simple and elegant design, placed in the home where it will appear so upscale grade, people feel that it is worth buying.
However, compared to the appearance of a thick look, Q1's weight is indeed very light. When I first started, I even suspected that Q1 was not cutting corners, and that the upper part of the polishing process had almost no weight, and all the weight was basically in the base, but the base was also very light. But after measuring the weight, I was still scared.
Millet router weight
Huawei Q1 router weight
Turning to the back, the Q1's indescribable. One power connector, three network cable connectors, no? ? Usb interface? Do not support external network disk? Can't set up a private cloud? Yes, Huawei Q1 does not support external devices. There is no page on expanding the disk in the setting interface of the router. You know, this router is still the product of 2016, and also won the "2016 China Newsletter 'China's popular corporate online shopping products'"!
Compared to the parent router, Q1's sub-router is small and cute. The highly condensed, compact body contains a variety of equipment. It does not feel heavy on the hand, but it feels justified. (It's the weight and volume of a small router.)
Compare with iphone6s. (positive))
Compared with iphone6s (side)
experience feelingsRouter installation
First of all, Q1 is really easy to install. (Actually, routers in the market are very easy to use.) Follow the instructions, take over the network cable, insert the power button, and then connect to the wifi. Follow the instructions to set up the Internet. The sub-router just waits for the normal work of the parent router, just to find a suitable place for a plug, the signal will be there.
Signal strengthTo tell the truth, I don’t feel bad about Huawei. But I have to say that people's signals really do a good job. If you put the mother router in the living room, in the case of closing the door, my room also has 3 cells! Brush microblogging, WeChat friends circle no problem! However, video consumption of these large users still can not run smoothly.
I also mentioned in the past that the signal received by the child router through the wire is fine, and there is almost no sense of any attenuation. However, the sub-router's signal strength is not high, as long as there is no signal received by the room.
Signal stabilityThe signal of Q1 I personally feel very fascinated, because there is no evidence that signal stability is not good, but in the actual experience can feel the problem.
1, a variety of electronic devices will suddenly be connected to the problem. In my room there was a polar meter Z4 Aurora (which was bought after Q1 was bought). When it was turned on, it was not connected to wifi. Sometimes it was connected and broken again. And this problem, the millet box placed in the living room, often appears.
2, used with a sudden change card. When watching a video, suddenly change the card, and then there is a small chrysanthemum buffer logo. Sometimes I suspect that Huawei is using Q1 to advertise its own products. Then open the app to see if someone is downloading something at home and then find everything is normal, but watching the video is still a card.
The frequency of the above two points will occur on a daily basis and occur more than twice.
App, router web page settings interface experienceOne word, spicy chicken. I have used millet routers, polar routing, TP-LINK, and Mercury people. Apart from individual apps, there are other apps that can be set up, and the adjustment functions are very complete. The web version is more complete, and everything can be done, but you look at Huawei's app. Nothing can be expanded to play things, is a simple router, web version of the setting is no app features complete! (However, Tucao Tucao, this function is still there.)
Usb developmentNo, really not! If you look at the app, you know that this router is a simple router. You can't do a small home nas and you can't download Po. It really is a pure router.
The biggest slot in history - no 5G signal!Yes, as a high-end router, the official website sells at a price of 600 routers, this router does not have 5G signal, really not.
to sum upadvantage:
1, the signal is good, very good
2, the way the signal can go through the wire to break through some of the pain points (like me)
3, high value
Disadvantages:
1, no 5G signal
2, there is no usb interface, does not support the expansion
3, just a pure router, can not be compared with the polar route, millet routers and other playability
4, there may be problems with signal stability
5, the price is too high, especially the price of the sub-router (sell a 160+).
The next notice: I was thinking about writing a Z4 Aurora experience? Or write my poor wedding decoration? (Or is it more important to raise your own photo level??)
Electronic cigarette is electronic product that generates vapor feel, taste like as a cigarette. Nic does not cause cancer, what really causes cancer are the thousands of harmful chemicals generated during tobacco burning. E-cigarette work as harming reducing product, the vapor contains fewer toxic chemicals in lower concentrations than traditional tobacco cigarette.
E-cigs also have name vape pen, disposable cigarette, it has many flavors such as apple, peach, orange, grape etc, people can enjoy multi-flavored Nic delivery experience through vapor, instead of Tobacco.
Axiswell is a manufacturer of no leak electronic cigarette vape with R&D, production and sales team. Our star products are disposable vape pen, Closed Pod System, Vape Pods. Our MOQ is low and we provide OEM/ODM service. We understand good taste and reasonable pricing are important for long term cooperation between us and clients. We wish to cooperate with every clients no matter big quantity or small quantity, reaching win-win outcome!
Electronic cigarette,vapes e cigarette,disposable electronic cigarette,vape electronic cigarettes,electronic cigarettes vape
Shenzhen Axiswell Technology Co., Ltd , https://www.medhealthycare.com