For the whole year of 2012, the revenue of Zhimao was 4.174 billion yuan, an annual decrease of 22%, the gross profit margin was 54.4%, the profit rate was 21%, the gross profit margin increased slightly from 52% in the previous year, and the profit margin fell from 24.7%. In 2012, the pre-tax profit of Mao Mao was 1.096 billion yuan, the post-tax surplus was 945 million yuan, the annual reduction was 38%, and the EPS was 2.52 yuan.
From the product application of Chimao in 2012, power testing accounted for 47% of the largest revenue, IC test accounted for about 17%, LCD and image test accounted for about 11%, clean energy Applications (including solar, LED, electric vehicles and battery formation systems) accounted for approximately 24% of the total, and other revenues accounted for approximately 1%.
Huang Qinming said that the two fastest-growing application areas in 2012 were IC test and LCD test applications. The annual growth rate of related equipment products was 44% and 25% respectively, and high-end display demand began to increase. Mastering the relevant opportunities, the mass-produced LCD panel has less exposure to the ink; while the IC measurement field is based on the combination of tri-temperature, parallel and other technologies to obtain international companies. Favor.
Looking at the outlook of each product application this year, Huang Qinming believes that the advanced production process (PoP package, 2.5D package, etc.) IC production volume, coupled with the continuous penetration of LED general lighting, IC measurement and LED measurement solutions It will become the main kinetic energy of this year; at the same time, the prospect of power electronic measuring equipment, which is the main force of Maoming in the past, is also good. Huang Qinming stressed that Mao Mao has continued to work in the European and American markets, and his views on related equipment are very positive.
Huang Qinming explained that the rise of mobile applications has made IC design factories must incorporate extreme high and low temperature tolerance into IC design considerations. With the three-temperature test, Zhimao successfully entered the procurement chain of the world's largest IC design company. Zhimao went to persuade IC design companies to use our products. Last year, the situation has been reversed. Zhimao products can be combined with IC design customers, labs for testing and testing customers, and even mass production machines. Huang Qinming expects this year. The revenue of IC test equipment can grow by a 2-digit percentage.
On the other hand, the performance of clean energy application equipment was unsatisfactory last year. Huang Qinming is still optimistic that LED will benefit from the increase in the penetration rate of general lighting and the simultaneous increase in shipments. All major manufacturers have certain inks on the improvement of product testing capacity. Test system requirements; As for solar equipment, Huang Qinming admits that it may take some time to digest excess capacity and wait for the market to go against the wind.
With the development of the times, the consumption level of people is gradually increasing. At the same time, people's entertainment methods are beginning to diversify, especially for modern young people. As a result, different kinds of electronic products are starting to be in people's lives, and the booming Electronic Cigarette industry reflects this.
Described including the upper shell, the upper shell at the top of the smoke outlet, as described in the bottom of the upper shell with airway, described with the smoke outlet in the airway and also to match the upper shell, the lower part of the shell described the airway in the direction of the lower shell extension, as described in the lower shell near one end of the upper shell is equipped with oil mouth, described the lower shell with batteries, described at the bottom of the bottom shell has come in The air port is provided with an oil storage bin in the lower shell, and the air passage passes through the oil storage bin and is provided with a heating atomization bin at one end away from the smoke outlet. The utility model has beneficial effects: it can meet the smoking habit of different users, avoid the premature end of the use experience caused by excessive consumption of smoke oil, and indirectly prolong the service time and life of the product.
Refillable E-Cig Oem,Refillable Vape Pod,Refillable Vape Pen Oem,Refillable Mod Oem
Shenzhen MASON VAP Technology Co., Ltd. , https://www.disposablevapepenfactory.com