At present, SAIC GM Buick brand new Regal is officially listed with 28T, 20T and 30H models. In contrast, the new Regal GS features a unique exterior and interior design, along with a new generation of CDC active suspension and FlexRide adaptive driving system.
Buick New Regal GS: Design
In terms of appearance, the new Regal GS adopts the design of the flying wing texture air intake grille and the exaggerated chrome air inlet on both sides of the front bumper. The entire front face is obviously more performance. On the side of the body, the new car is equipped with a new 18-inch blackened five-spoke sports wheel.
Buick New Regal GS with Brembo brake calipers
In the tail, the new Regal GS is equipped with a chrome double exhaust pipe, integrated aerodynamic rear spoiler, etc., which is very appreciative of the driver's desire.
Buick New Regal GS: Interior Design
For the interior, the new Regal GS all-black interior with red stitching accentuates the sporty feel. At the same time, the new car is equipped with a three-plate flat-bottom steering wheel with shift paddles and an integrated sports seat. In addition, the new car is equipped with an 8-inch central control screen with mobile phone interconnection.
Buick New Regal GS: Power System
In terms of power, the new generation Regal GS is equipped with a 2.0T SIDI direct-injection turbocharged engine, and the transmission is matched with a 9-speed Hydra-MaTIc intelligent transmission. It is worth mentioning that the new car is equipped with a new generation of CDC active suspension system, FlexRide adaptive driving system and Brembo brake calipers. As for the new Regal regular version, it will be equipped with 1.5T and 2.0T two petrol engines. The maximum power is 163Ps and 254Ps respectively, which is matched with a 9-speed automatic transmission. At the same time, the new Regal also offers a hybrid version of a 1.8L naturally aspirated engine and electric motor, matched with an E-CVT gearbox.
0.8mm Pin Header
Antenk 0.8mm Pitch Male Header series is a fine pitch, low profile, single/dual/three/four row, PCB mounted connector set intended for limited space applications or where total weight is a factor. Our specially tooled insulators and contacts maintain consistent high quality through our automated production processes. Each series is available in thru-hole PCB or SMT mounting and plated tin, gold or selective gold as specified.
0.8mm Pin Header Options
Number of Rows
1/Single
2/Double
3/Three
4/Quad
Number of Positions
2 Position
3 Position
4 Position
5 Position
6 Position
8 Position
10 Position
12 Position
14 Position
15 Position
16 Position
17 Position
20 Position
Termination Style
SMD/SMT
Through Hole
Mounting Angle
Right Angle
Straight
0.8mm Pin Header Specifications:
Material: Standard Hi-Temp insulator: Nylon 6T, rated UL94V-0
Insulator Color: Black
Contacts: Phosphor Bronze
Plating:
U = Gold over nickel underplate
SG = Gold over nickel underplate on
contact area, tin over copper underplate on tails.
T = Tin over copper underplate overall.
Electrical:
Operating voltage: 250V AC max.
Current rating: 1 Amp max
Contact resistance: 20 mΩ max. initial
Insulation resistance: 5000 MΩ min.
Dielectric withstanding voltage: 1000V AC for 1 minute
Mechanical:
Mating durability: 500 cycles min.
Temperature Ratings: Operating temperature: -40°C to +105°C
Max process temp: 230°C for 30 ~ 60 seconds (260°C for 10 seconds)
Soldering process temperature: 260°C
Packaging:
Anti-ESD plastic bags or tubes
Approvals and Certifications:
UL Recognized File no. E224053
Pin Header,0.8Mm Male Header,0.8Mm Pin Header,0.8Mm Male Header Pins,0.8mm Pitch Pin Header,SMT 0.8mm Pin Header, THT 0.8mm Pin Header
ShenZhen Antenk Electronics Co,Ltd , https://www.pcbsocket.com